Stan The Leather Man

Men’s CUSTOM MADE Motorcycle Jacket

When you get people like Lety and Stan to Custome design your leathers you know they will last longer than most of the cars we drive.

Custom Leather Jacket Design
Custom Leather Jacket Design

They will aslo look smarter as time goes on. A quality leather jacket will look better with age. It is more than a Jacket when you are a Motorcycle Rider, it is also protection. Here is some of the great features they puinto every jacket they make custom just for you.
Features:Premium supple 4oz full-grain cowhide, Saturn or Nassau, Three zippered air vents: two in front, one in back, Classic angled main zipper, Zippered vents are hidden with leather welts to prevent wind chill when not in use, Solid brass, nickel plated grommet vents under arms, Padded drop-back to protect kidneys even when body is angled forward, Fixed mesh lining, Removable (snap-out) fleece liner, One secret pocket inside left lapel of main jacket body, One denim pocket in removable fleece lining, inside left lapel, Solid brass, nickel-plated snaps, Solid brass, nickel-plated YKK zippers, Tank Protector: covers jacket belt buckle and keeper to prevent damage to gas tank, using a stylish braid attachment.

They also make great custom leather bags.

 Custom Leather Bags
Custom Leather Bags

Please phone 604.820.4996 if you are interested in CUSTOM LEATHER, and we will provide you with a price quote.
The following information may be required:
Item Name
Type of Leather
Both options of leather look exactly the same, the black Nasau is just heavier than the black Saturn
Black Nasau: heavy 3-4 ounce Black Saturn: lighter 2-3 ounce
Other colours and specialty leather also available
Describe the item you would like designed in as much detail as possible.
———————————————————————————————————————————————————————
If Ordering a CUSTOM BELT: Measure Waist or Hips where you want the belt to sit
———————————————————————————————————————————————————————
If ordering a CUSTOM JACKET:

Do not try to measure yourself, have someone measure you. Follow directions exactly. Use a soft measuring tape available at most fabric stores or drugstores. Pull the tape so that it rest comfortably. Not too tight, not too loose. DO NOT ADD OR SUBTRACT FROM YOUR MEASUREMENTS as exact measurements are necessary for construction.

Please call our staff with special sizing requirements such as extra length or growth room for children.

1. Bottom of Neck to Waist *length of jacket – Measure from bottom of collar to the lower edge of the belt.
2. Chest – Measure around the fullest part of chest. Do not let tape sag in back.
3. Waist- Measure just below the beltline. Tape should touch the lower edge of the belt.
4. Hips – Measure around fullest part of hips. Stand with heels together. This measurement is used for longer jackets.
5. Sleeve – Measure from center of collar bottom, across shoulder, around elbow, to sleeve cuff; rest your arms on your hips then measure. This allows for a comfortable bend in the arm, arms should be bent more than when being measured for the shoulders.
6. Shoulders – Measure from the top of the shoulder down to the wrist, arm should be in a comfortable stance at your side, slightly bent.
7. Side seam – Measure from the side down, start measuring a couple of inches below the arm pit at the fullest part of the chest, down to the waist.
8. Middle of neck to shoulder – measure from the nape of the neck to the shoulder bone.

———————————————————————————————————————————————————————
If ordering a CUSTOM VEST:

1. Bottom of Neck to Waist *length of vest – Measure from bottom of collar to the lower edge of the belt.
2. Chest – Measure around the fullest part of chest. Do not let tape sag in back.
3. Waist- Measure just below the beltline. Tape should touch the lower edge of the belt.
4. Hips – Measure around fullest part of hips. Stand with heels together. This measurement is used for longer vests.
5. Side seam – Measure from the side down, start measuring a couple of inches below the arm pit at the fullest part of the chest, down to the waist.
6. Middle of neck to shoulder – measure from the nape of the neck to the shoulder bone.

———————————————————————————————————————————————————————
If ordering CUSTOM CHAPS:
Take your measurements wearing your pants, belt, and boots. These should be the same clothes you wear when you are going to ride. Do not try to measure yourself, have someone measure you. Follow directions exactly. Use a soft measuring tape available at most fabric stores or drugstores. Pull the tape so that it rest comfortably on your leg. Not too tight, not too loose. DO NOT ADD OR SUBTRACT FROM YOUR MEASUREMENTS as exact measurements are necessary for construction. Please call our staff with special sizing requirements such as extra length or growth room for children.

1. Waist- Measure just below the beltline. Tape should touch the lower edge of the belt.
2. Waist to Floor – Measure from the top of the belt to the floor
3. Waist to Knee – Measure from the top of the belt to the middle of the knee
4. Waist to Crotch – To measure sit in a chair and measure side from top of belt to top of chair seat
5. Thigh – Measure straight around the thigh at the uppermost point possible
6. Knee – Measure around the center of the knee
7. Calf – Measure around the heaviest part of the calf
———————————————————————————————————————————————————————
Required for All Orders:
First Name
Last Name
Address
City
Province/State
Postal/Zip Code
Country
Daytime Phone